Greenbyte Ideas
Our approach to product feedback
The benefits of giving us your product feedback
What happens to your product feedback
How we choose what to implement
- Customer feedback - there are many ways we listen for your feedback:formal customer interviews and other research activitiesevents like conferences and trade showscomments and votes on issues here in Greenbyte & BluePoint Influence
- CSM team insights - our CSM team knows which issues are the most challenging and most common for customers.
- Product analytics - we track how users move through the system, which helps us understand how existing features are being used.
- Product strategy - our long-term strategic vision for the products.
Custom applications
216 results found
-
Status Log: Display Days - Hours and Minutes
I would like Breeze to display durations on status logs / stops in days - hours and minutes. At the moment it rounds it up or down to days which is not a true reflection of the length of the stop and is a misrepresentation.
4 votesBringing this back on based on requests to see if we get more votes on it.
-
Analyze Dashboard: custom interval+zoomable graphs
Make it possible to set and a custom interval in Analyse Dashboards - in order to review what happened during a specific interval. In addition to the above it would be very usefull if the same zoom functionalities could be used as in Datastudio to zoom into a certain period. This way the user does not have to open each graph seperately in datastudio to do the zoom actions but it can be done directly from the analyses dashboard.
4 votes -
Show names of personnel on site access overview page
Show names of personnel on site access overview page - so you don't have to hover over them to see the names.
4 votes -
Add new performance index calculation method - avoiding false low performance alarms
With the current definition of the performance index (PI = P act/P pot) and the way it is used in the low performance alarm ("average the PI in the period x if the average wind speed is above y") - we often see false alarms due to too high performance index volatility and especially PIs dropping at low wind speeds. This could be solved with a PI definition that focuses on the difference between P act and P pot rather that the ratio P act/P pot - the modified formular being PI mod = (P rated – (P pot -…
4 votes -
Attach Active Custom Alarms to Tasks
It would be useful to be able to attach active custom alarms to tasks. Some of the alarms that we have created - we would like to associate with a task to signify to the operator that the alarm has been analyzed and categorized. This would be similar to how statuses can be associated with a task.
4 votes -
E-mail/Push note to the creator of a task when the expected end time has passed
When a task is done and the expected end time passed and the task ist unresolved. Then the creator or the person who make the latest update gets a reminder through email or push note.
4 votes -
Find statuses with a comment, to identify major status events
In order to quickly see major status events, we would in Status Log or Status Categorization like to filter out all events that have a comment.
In Aug 22, a new feature was released to search within the comments. This is similar but not the same as finding all statuses with comments.
3 votesThanks for your feedback, this is a great request. It's open for voting from other users.
-
Improve how Offshore windfarms are shown in the Map
When looking at an offshore windfarm, no background layer is visible. The grey background is unappealing. Also the zooming is not quite 'handy'. When zooming out, the granularity changes from individuals windturbines to wind farm level.
Hence, two requests:
1. Can the zoom (out) be such than an entire windfarm can be visualised in 1 screen?
2. Can the back ground option of https://map.openseamap.org/ be incorporated? Note this options is also available in IconMaps, and we use it in PowerBI reports.3 votesThanks for your feedback, this is a great request. It's open for voting from other users.
-
Expand Button - entire system
This is a nice feature that should be in the entire system, specially for monitoring dashboards (not obvious which event is active during that moment) and data studio, otherwise you have to go to event log or status categorization to check them.
3 votesThanks for your feedback, this is a great request. It's open for voting from other users.
-
Middle voltage loss calculation (Energy Export vs. Energy Meter) in MWh or %
When metering systems are connected to the Scada one standardized tech. KPI is to understand the middle voltage losses between WTGs and official energy metering.
Ideally such should be calculated on kWh/MWh basis as simple delta between Sum of Energy Export (WTGs) and official Metering. Additionally the % deviation should be calculated, too.Further benefits:
As Greenbyte introduced the Loss Waterfall also this calculation would benefit from the above as additional losses (depending the size of the wind farm typically 0.5 - 2.x %) could be highlighted. Additional precision for the Loss Waterfall Diagram!3 votesThanks for your feedback, this is a great request. It's open for voting from other users.
-
Trainee Personnel qualification
Is it possible to add a "Trainee" section under personnel qualifications? There are many technicians who do not have any qualifications yet and it would be advantageous for OCC etc... to be confident on the status of the technician and know to not allow them to take control of a turbine and that only site access is allowed.
3 votesThanks for your feedback, this is a great request. It's open for voting from other users.
-
"Service this year" signal to count contractual year an not calendar year
The signal "service this year", coming from the "maintenance" toggle on availability contracts, currently considers a calendar year. To make it coherent with the availability contract, it should consider the "contractual year" instead.
3 votesThanks for your feedback, this is a great request. It’s open for voting from other users.
-
Allow API permissions that limit the period of data that can be accessed
I would like to share data, but just for a set time period, for example from Jan-2020 to Dec-2020. As such I propose having a start-date, end-date and "all time" period option when creating (or editing) the API keys
3 votesThanks for your feedback, this is a great request. It’s open for voting from other users.
-
MET Mast Data Availability
MET Masts should have a Data availability tag in the Data studio, it is currently quite difficult to validate the integrity of this data.
3 votesThanks for your feedback, this is a great request. It’s open for voting from other users.
-
Coherent Functionality in Status Log and Data Studio
When using the status log for a turbine or wind farm, one has the possibility to filter for specific statuses but the lost production associated with a certain status can not be displayed.
Inversely, when in data studio and using the status log, lost production is displayed but one cannot filter for specific statuses.
It would be great if both these functionalities could be accesible in either the status log or in the status log in data studio.
3 votesThanks for your feedback, this is a great request. It’s open for voting from other users.
-
Add a Notes widget, where I can enter plain text
I'd like to be able to add explanations for things or comments to my dashboard and a simple notes widget would be great.
3 votes -
Real-time signal display widget - don't average the "delay" column
In this widget, the "delay" in the comms averages all of the devices on-site. This is, one device that has not been communicating for several days may distort the figure shown for a whole site (when aggregating per site).
Seeing the minimum delay would make more sense to see if the communication in the plant is working or not. If there are issues with an individual device I would receive an alert for this.
3 votesThanks for your feedback, this is a great request. It’s open for voting from other users.
-
Remove the power curve from the "Production distribution" widget in Reports
The "Production distribution" is a great widget, but by having the PCs on top of it, it just becomes very noisy. In the Data Studio it is possible to only plot the distribution, it would be great to have this option in Reports.
3 votesThanks for your feedback, this is a great request. It’s open for voting from other users.
-
Report - Gantt configuration - Select Period
It's a fixed period. It's possible to select Categories and State, but not the period.
3 votesThanks for your feedback, this is a great request. It’s open for voting from other users.
-
Power bars and maximum installed effect or maximum effect according to power curve
It would be nice if the app and the web page could use the maximum power curve value instead of installed capacity in the power bars.
This would improve our visual knowledge if the machine is running accordingly to the current PC.
3 votesThanks for your feedback, this is a great request. It’s open for voting from other users.
- Don't see your idea?